1.Drag Drop question
Drag and drop question. Drag the items to the proper locations.
Correct Answers: 70-236 70-291 70-284
2.Drag Drop question
Drag and drop question. Drag the items to the proper locations.
Correct Answers:
3.When should solution templates be created and deployed?
A: for low risk solutions that will be deployed more than once
B: for low risk solutions that will be deployed once
C: for high risk solutions that will be deployed more than once
D: for high risk solutions that will be deployed once
Correct Answers: C
4.R1 and R2 cannot establish an EIGRP neighbor relationship.
Both R1 and R2 serial interfaces are showing status up,
protocol up and can successfully ping each other. Given the
above show outputs, what is the problem?
A: auto-summary mismatch
B: no eigrp log-neighbor-changes
C: metric weights mismatch
D: needs a more specific mask in the network statement
E: both routers missing the neighbor ip-address command
Correct Answers: C 1Y0-A08 70-290 BI0-132
5.What type of interface will be created when the command ppp
multilink is added to an ISDN BRI interface?
A: serial 0/0
B: BRI 0/0
C: BRI 0/0:1 and BRI 0/0:2
D: BRI 0/0:23
E: virtual-access 1
F: virtual-template 1
Correct Answers: E
6.Over the past year the amount of traffic between certain
access-layer network segments and the company’s intranet
website has increased dramatically. The CPU utilization levels
of network devices and intranet server are well within
acceptable limits. Congestion has been observed at the
connection between the access-layer switches and the
distribution layer, multilayer switches. What should be done to
help eliminate congestion?
A: Upgrade access-layer switches to better performing models.
B: Implement QoS features on the access-layer switches.
C: Upgrade the end user Gigabit Ethernet links.
D: Increase the bandwidth on the upstream links from the
access-layer switches.
E: Upgrade the distribution layer, multilayer switches to
better performing models.
F: Implement QoS features on the distribution layer, multilayer
switches.
Correct Answers: D 1y0-a09 310-202 xk0-002
7.The network administrator needs to verify that the web server
is accessible to all employees within the company intranet and
also verify connectivity at all OSI layers. How can the
administrator test to ensure all layers of the OSI model are
working correctly?
A: Ping the web server.
B: Telnet to port 80 of the web server.
C: Issue the debug ip http server command.
D: Issue the show ip http server command.
E: Issue the netstat -r command.
F: Ping the web server by name.
Correct Answers: B
8.Refer to the exhibit. R1 is unable to ping R2. What is the
most likely cause of the problem?
A: the shut down of the R2 Frame Relay interface
B: incorrect IP address
C: incorrect Frame Relay encapsulation configured
D: incorrect DLCI configured
E: incorrect keepalive setting configured
F: incorrect LMI set
Correct Answers: B
9.R1 has an EIGRP neighbor relationship with R2, but is unable
to establish a neighbor relationship with R3. R1 and R3 can
successfully ping each other. Observe the three show run
outputs. What two problems exist? (Choose two.)
A:the no auto-summary command needed on R3
B:incorrect mask on the EIGRP network statement of R1
C:mismatch autonomous system number between R1 and R3
D:mismatch variance multiplier between R1 and R3
E:mismatch hold-time between R1 and R3
Correct Answers: B, C
10.The above message appears on your console screen. Given this
information, which statement is true?
A: The wrong peer is set on the crypto map.
B: The crypto algorithms do not match.
C: The DSS key is missing or invalid.
D: The IP address for the remote peer is incorrect.
Correct Answers: B